Re: [PATCH v3 2/4] mips: dts: ralink: mt7621: add phandle to system controller node for watchdog
From: Arınç ÜNAL <hidden>
Date: 2023-02-10 17:47:16
Also in:
linux-mips, linux-watchdog, lkml
Could you also change the node name to watchdog@100? make dtbs_check points it out: wdt@100: $nodename:0: 'wdt@100' does not match '^watchdog(@.*|-[0-9a-f])?$' Thanks. Arınç On 10.02.2023 20:38, Sergio Paracuellos wrote:
quoted hunk ↗ jump to hunk
To allow to access system controller registers from watchdog driver code add a phandle in the watchdog 'wdt' node. This avoid using arch dependent operations in driver code. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> --- arch/mips/boot/dts/ralink/mt7621.dtsi | 1 + 1 file changed, 1 insertion(+)diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi index 5ca40fd21..764916eaf 100644 --- a/arch/mips/boot/dts/ralink/mt7621.dtsi +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi@@ -73,6 +73,7 @@ sysc: syscon@0 { wdt: wdt@100 { compatible = "mediatek,mt7621-wdt"; reg = <0x100 0x100>; + mediatek,sysctl = <&sysc>; }; gpio: gpio@600 {