[PATCH 24/32] dt-bindings: pinctrl: qcom,qcm2290: fix matching pin config
From: Krzysztof Kozlowski <hidden>
Date: 2022-09-24 08:07:56
Also in:
linux-arm-msm, linux-gpio, lkml
Subsystem:
arm/qualcomm mailing list, open firmware and flattened device tree bindings, pin control subsystem, pin controller - qualcomm, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Bjorn Andersson, Linus Torvalds
The TLMM pin controller follows generic pin-controller bindings, so should have subnodes with '-state' and '-pins'. Otherwise the subnodes (level one and two) are not properly matched. This method also unifies the bindings with other Qualcomm TLMM and LPASS pinctrl bindings. Signed-off-by: Krzysztof Kozlowski <redacted> --- .../bindings/pinctrl/qcom,qcm2290-pinctrl.yaml | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
index 3f4f1c0360b5..5324b61eb4f7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml@@ -50,8 +50,9 @@ patternProperties: oneOf: - $ref: "#/$defs/qcom-qcm2290-tlmm-state" - patternProperties: - ".*": + "-pins$": $ref: "#/$defs/qcom-qcm2290-tlmm-state" + additionalProperties: false '$defs': qcom-qcm2290-tlmm-state:
@@ -146,19 +147,19 @@ examples: gpio-ranges = <&tlmm 0 0 127>; sdc2_on_state: sdc2-on-state { - clk { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>;
--
2.34.1