Thread (46 messages) 46 messages, 5 authors, 2022-10-03
STALE1386d
Revisions (3)
  1. v1 current
  2. v2 [diff vs current]
  3. v3 [diff vs current]

[PATCH 11/32] dt-bindings: pinctrl: qcom,ipq6018: fix indentation in example

From: Krzysztof Kozlowski <hidden>
Date: 2022-09-24 08:06:17
Also in: linux-arm-msm, linux-gpio, lkml
Subsystem: arm/qualcomm mailing list, open firmware and flattened device tree bindings, pin control subsystem, pin controller - qualcomm, the rest · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Bjorn Andersson, Linus Torvalds

Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <redacted>
---
 .../pinctrl/qcom,ipq6018-pinctrl.yaml         | 34 +++++++++----------
 1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
index 2026fdac9fa8..075d014b2ec5 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -150,21 +150,21 @@ additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        tlmm: pinctrl@1000000 {
-              compatible = "qcom,ipq6018-pinctrl";
-              reg = <0x01000000 0x300000>;
-              interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-              interrupt-controller;
-              #interrupt-cells = <2>;
-              gpio-controller;
-              #gpio-cells = <2>;
-              gpio-ranges = <&tlmm 0 0 80>;
-
-              serial3-state {
-                      pins = "gpio44", "gpio45";
-                      function = "blsp2_uart";
-                      drive-strength = <8>;
-                      bias-pull-down;
-              };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq6018-pinctrl";
+        reg = <0x01000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 80>;
+
+        serial3-state {
+            pins = "gpio44", "gpio45";
+            function = "blsp2_uart";
+            drive-strength = <8>;
+            bias-pull-down;
         };
+    };
-- 
2.34.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help