Quoting Ansuel Smith (2022-03-13 12:04:14)
quoted hunk ↗ jump to hunk
Now that we have converted every driver to parent_data, it was
notice that the bootloader can't really leave the system in a
strange state where l2 or the cpu0/1 can be sourced in a number of ways
for example cpu1 sourcing out of qsb, l2 sourcing out of pxo.
To correctly reset the mux and the HFPLL force the sec_mux to QSB.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/clk/qcom/krait-cc.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c
index 6530f10a546f..1bdc89c097e6 100644
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -15,6 +15,8 @@
#include "clk-krait.h"
+#define QSB_RATE 1
+
static unsigned int sec_mux_map[] = {
2,
0,@@ -178,6 +180,12 @@ krait_add_sec_mux(struct device *dev, struct clk *qsb, int id,
if (ret)
clk = ERR_PTR(ret);
+ /* Force the sec_mux to be set to QSB rate.
The comment start should be on a line alone
/*
* Force the ...
quoted hunk ↗ jump to hunk
+ * This is needed to correctly set the parents and
+ * to later reset mux and HFPLL to a known freq.
+ */
+ clk_set_rate(clk, QSB_RATE);
+
err_clk:
if (unique_aux)
kfree(parent_name);