[PATCH 15/16] dts: qcom-ipq8064: add missing krait-cc compatible and clocks

From
Ansuel Smith <ansuelsmth@gmail.com>
Date
2022-03-13 19:06:14
Also in
linux-arm-msm, linux-clk, linux-tegra, lkml
Reply to
Ansuel Smith, 2022-03-13
Add missing krait-cc clock-controller and define missing aux clock for
CPUs. Also change phandle for l2cc node to point to pxo_board instead
of gcc PXO_SRC.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 996f4458d9fc..888f17d64283 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -468,11 +468,19 @@ IRQ_TYPE_EDGE_RISING)>,
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clock-output-names = "acpu0_aux";
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
 		};
 
 		acc1: clock-controller@2098000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clock-output-names = "acpu1_aux";
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
 		};
 
 		adm_dma: dma-controller@18300000 {
@@ -782,11 +790,21 @@ tcsr: syscon@1a400000 {
 		l2cc: clock-controller@2011000 {
 			compatible = "qcom,kpss-gcc", "syscon";
 			reg = <0x2011000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
 			clock-names = "pll8_vote", "pxo";
 			clock-output-names = "acpu_l2_aux";
 		};
 
+		kraitcc: clock-controller {
+			compatible = "qcom,krait-cc-v1";
+			clocks = <&gcc PLL9>, <&gcc PLL10>, <&gcc PLL12>,
+				 <&acc0>, <&acc1>, <&l2cc>, <&qsb>;
+			clock-names = "hfpll0", "hfpll1", "hfpll_l2",
+				      "acpu0_aux", "acpu1_aux", "acpu_l2_aux",
+				      "qsb";
+			#clock-cells = <1>;
+		};
+
 		lcc: clock-controller@28000000 {
 			compatible = "qcom,lcc-ipq8064";
 			reg = <0x28000000 0x1000>;
-- 
2.34.1
Thread (31 messages) 31 messages, 4 authors, last reply 2022-03-17
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help