Thread (23 messages) 23 messages, 6 authors, 2022-04-23

Re: [PATCH V1 07/10] arm64: tegra: Enable PCIe slots in P3737-0000 board

From: Krzysztof Kozlowski <hidden>
Date: 2022-02-06 11:29:59
Also in: linux-pci, linux-phy, linux-tegra, lkml

On 05/02/2022 17:21, Vidya Sagar wrote:
quoted hunk ↗ jump to hunk
Enable PCIe controller nodes to enable respective PCIe slots on
P3737-0000 board. Following is the ownership of slots by different
PCIe controllers.
Controller-1 : On-board Broadcom WiFi controller
Controller-4 : M.2 Key-M slot
Controller-5 : CEM form-factor x8 slot

Signed-off-by: Vidya Sagar <redacted>
---
 .../nvidia/tegra234-p3737-0000+p3701-0000.dts | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index efbbb878ba5a..b819e1133bc4 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -21,4 +21,30 @@
 	serial {
 		status = "okay";
 	};
+
+	pcie@14100000 {
+		status = "okay";
+
+		phys = <&p2u_hsio_3>;
+		phy-names = "p2u-0";
+	};
+
+	pcie@14160000 {
+		status = "okay";
+
+		phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+		       <&p2u_hsio_7>;
+		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+	};
+
+	pcie@141a0000 {
+		status = "okay";
+
+		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+			    "p2u-5", "p2u-6", "p2u-7";
+	};
+
No need for trailing new line.
 };

Best regards,
Krzysztof
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help