@@ -10,6 +10,8 @@ Required properties:
 - power-domains: A phandle to the node that controls power to the respective
   PCIe controller and a specifier name for the PCIe controller. Following are
   the specifiers for the different PCIe controllers
+  Tegra194:
+  ---------
     TEGRA194_POWER_DOMAIN_PCIEX8B: C0
     TEGRA194_POWER_DOMAIN_PCIEX1A: C1
     TEGRA194_POWER_DOMAIN_PCIEX1A: C2

@@ -18,6 +20,21 @@ Required properties:
     TEGRA194_POWER_DOMAIN_PCIEX8A: C5
   these specifiers are defined in
   "include/dt-bindings/power/tegra194-powergate.h" file.
+  Tegra234:
+  ---------
+    TEGRA234_POWER_DOMAIN_PCIEX4BA: C0
+    TEGRA234_POWER_DOMAIN_PCIEX1A : C1
+    TEGRA234_POWER_DOMAIN_PCIEX1A : C2
+    TEGRA234_POWER_DOMAIN_PCIEX1A : C3
+    TEGRA234_POWER_DOMAIN_PCIEX4BB: C4
+    TEGRA234_POWER_DOMAIN_PCIEX8A : C5
+    TEGRA234_POWER_DOMAIN_PCIEX4A : C6
+    TEGRA234_POWER_DOMAIN_PCIEX8B : C7
+    TEGRA234_POWER_DOMAIN_PCIEX4CA: C8
+    TEGRA234_POWER_DOMAIN_PCIEX4CB: C9
+    TEGRA234_POWER_DOMAIN_PCIEX4CC: C10
+  these specifiers are defined in
+  "include/dt-bindings/power/tegra234-powergate.h" file.
 - reg: A list of physical base address and length pairs for each set of
   controller registers. Must contain an entry for each entry in the reg-names
   property.

@@ -47,16 +64,33 @@ Required properties:
   "p2u-N": where N ranges from 0 to one less than the total number of lanes
 - nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed
   by controller-id. Following are the controller ids for each controller.
+  Tegra194:
+  ---------
     0: C0
     1: C1
     2: C2
     3: C3
     4: C4
     5: C5
+  Tegra194:
+  ---------
+    0 : C0
+    1 : C1
+    2 : C2
+    3 : C3
+    4 : C4
+    5 : C5
+    6 : C6
+    7 : C7
+    8 : C8
+    9 : C9
+    10: C10
 - vddio-pex-ctl-supply: Regulator supply for PCIe side band signals
 
 RC mode:
-- compatible: Tegra19x must contain  "nvidia,tegra194-pcie"
+- compatible: Must be
+  - "nvidia,tegra194-pcie" for Tegra194
+  - "nvidia,tegra234-pcie" for Tegra234
 - device_type: Must be "pci" for RC mode
 - interrupt-names: Must include the following entries:
   "msi": The Tegra interrupt that is asserted when an MSI is received

@@ -99,7 +133,8 @@ In Tegra194, Only controllers C0, C4 & C5 support EP mode.
 
 Optional properties:
 - pinctrl-names: A list of pinctrl state names.
-  It is mandatory for C5 controller and optional for other controllers.
+  It is mandatory for C5 controller in Tegra194 and optional for other
+  controllers.
   - "default": Configures PCIe I/O for proper operation.
 - pinctrl-0: phandle for the 'default' state of pin configuration.
   It is mandatory for C5 controller and optional for other controllers.

@@ -108,7 +143,7 @@ Optional properties:
     improve performance when a platform is designed in such a way that it
     satisfies at least one of the following conditions thereby enabling root
     port to exchange optimum number of FC (Flow Control) credits with
-    downstream devices
+    downstream devices. This is applicable for only Tegra194.
     1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
     2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
        a) speed is Gen-2 and MPS is 256B

@@ -119,6 +154,9 @@ Optional properties:
    specified in microseconds
 - nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be
    specified in microseconds
+- nvidia,enable-srns: This boolean property needs to be present if the
+   controller is configured to operate in SRNS (Separate Reference Clocks with
+   No Spread-Spectrum Clocking). This is applicable only for Tegra234.
 
 RC mode:
 - vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot

@@ -127,6 +165,9 @@ RC mode:
 - vpcie12v-supply: A phandle to the regulator node that supplies 12V to the slot
   if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
   in p2972-0000 platform).
+- nvidia,enable-ext-refclk: This boolean property needs to be present if the
+  controller is configured to use the reference clocking coming in from an
+  external clock source instead of using the internal clock source.
 
 EP mode:
 - nvidia,refclk-select-gpios: Must contain a phandle to a GPIO controller

@@ -243,3 +284,62 @@ Tegra194 EP mode:
 		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
 			    "p2u-5", "p2u-6", "p2u-7";
 	};
+
+Tegra234 RP mode:
+-----------------
+
+	pcie@141a0000 {
+		compatible = "nvidia,tegra234-pcie";
+		power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
+		reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */
+		      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+		reg-names = "appl", "config", "atu_dma", "dbi";
+
+		status = "disabled";
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <8>;
+		num-viewport = <8>;
+		linux,pci-domain = <5>;
+
+		clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
+			 <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+
+		nvidia,bpmp = <&bpmp 5>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+		bus-range = <0x0 0xff>;
+
+		ranges = <0x43000000 0x27 0x40000000 0x27 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */
+			 <0x02000000 0x0  0x40000000 0x2b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+			 <0x01000000 0x0  0x3a100000 0x00 0x3a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+		interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>,
+				<&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>;
+		interconnect-names = "dma-mem", "write";
+
+                phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+                       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+                       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+                phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+                            "p2u-5", "p2u-6", "p2u-7";
+	};