Re: [PATCH net-next v3 6/6] net: lan966x: Add switchdev support

The 12/13/2021 14:29, Vladimir Oltean wrote:

On Mon, Dec 13, 2021 at 03:26:56PM +0100, Horatiu Vultur wrote:

quoted

quoted

They are independent of each other. You deduce the interface on which
the notifier was emitted using switchdev_notifier_info_to_dev() and act
upon it, if lan966x_netdevice_check() is true. The notifier handling
code itself is stateless, all the state is per port / per switch.
If you register one notifier handler per switch, lan966x_netdevice_check()
would return true for each notifier handler instance, and you would
handle each event twice, would you not?

That is correct, I will get the event twice which is a problem in the
lan966x. The function lan966x_netdevice_check should be per instance, in
this way each instance can filter the events.
The reason why I am putting the notifier_block inside lan966x is to be
able to get to the instance of lan966x even if I get a event that is not
for lan966x port.

That isn't a problem, every netdevice notifier still sees all events.

Yes, that is correct.
Sorry maybe I am still confused, but some things are still not right.

So lets say there are two lan966x instances(A and B) and each one has 2
ports(ethA0, ethA1, ethB0, ethB1).
So with the current behaviour, if for example ethA0 is added in vlan
100, then we get two callbacks for each lan966x instance(A and B) because
each of them registered. And because of lan966x_netdevice_check() is true
for ethA0 will do twice the work.
And you propose to have a singleton notifier so we get only 1 callback
and will be fine for this case. But if you add for example the bridge in
vlan 200 then I will never be able to get to the lan966x instance which
is needed in this case.

That is why if the lan966x_netdevice_check would be per instance, then
we can filter like before, we still get call twice but then we filter for
each instance. We get the lan966x instance from notifier_block and then
we can check if the port netdev_ops is the same as the lan966x
netdev_ops.

And in the other case we will still be able to get to the lan966x instance
in case the bridge is added in a vlan.

DSA intercepts a lot of events which aren't directly emitted for its own
interfaces. You don't gain much by having one more, if anything.

quoted

quoted

notifier handlers should be registered as singletons, like other drivers
do.

It looks like not all the other driver register them as singletone. For
example: prestera, mlx5, sparx5. (I just have done a git grep for
register_switchdev_notifier, I have not looked in details at the
implementation).

Not all driver writers may have realized that it is an issue that needs
to be thought of.

-- 
/Horatiu