Thread (12 messages) read the whole thread 12 messages, 3 authors, 2021-12-08

Re: [PATCH v2 2/2] arm64: dts: sm8350: fix tlmm base address

From: Katherine Perez <hidden>
Date: 2021-12-08 23:18:06
Also in: linux-arm-msm, lkml

On Tue, Dec 07, 2021 at 06:35:41PM -0800, Bjorn Andersson wrote:
On Tue 07 Dec 18:21 PST 2021, Katherine Perez wrote:
quoted
On Tue, Dec 07, 2021 at 05:16:14PM +0530, Vinod Koul wrote:
quoted
On 30-11-21, 21:15, Bjorn Andersson wrote:
quoted
On Mon 22 Nov 22:03 CST 2021, Vinod Koul wrote:
quoted
On 22-11-21, 11:05, Katherine Perez wrote:
quoted
TLMM controller base address is incorrect and will hang on some platforms.
Fix by giving the correct address.
Thanks, recheck the spec this looks correct. We should have tlmm reg
space here and not tlmm base which also contains xpu region (thus hang)
Aren't you reading the patch backwards?
I guess :(
quoted
Afaict downstream the driver carries an offset of 0x100000, which we
dropped as we upstreamed the driver. As such changing reg to 0x0f000000
should cause most gpio register accesses to fall outside the actual
register window.

Or perhaps I'm missing something here?
I relooked and XPU is at 0xF000000 and Reg at 0xF100000
So this patch should be dropped as such. The size mentioned in
documentation is also correct

Katherine, can you elaborate more on the hang you have observed? Any
specific pins you use which causes this?
Hi Vinod,

Yes, it seems to hang in msm_pinctrl_probe. Specifically, line 734 in
gpiolib.c: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpio/gpiolib.c#n734.
On i=4, it hangs on assign_bit and the system goes into a reboot loop.
When I set the TLMM address to f000000, I don't see this issue at all.
The cause for that is quite likely that gc->get_direction() will read
the configuration from gpio<i>'s registers and gpio4 in your system is
reserved for use by some trusted application.

When you change the TLMM address you avoid this problem by just reading
random registers outside the region that contains protected registers.


Adjust the gpio-reserved-ranges in your device's tlmm node to mark gpio4
(probably 4 pins long) as "invalid", gpiolib will then not touch them.

Regards,
Bjorn
Thanks, Bjorn. That makes sense. I'll resubmit with the changes to my
device's TLMM node and will drop this patch.

-Katherine
quoted
quoted

-- 
~Vinod
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help