Re: [PATCH v2 2/2] arm64: dts: sm8350: fix tlmm base address

On Tue, Dec 07, 2021 at 05:16:14PM +0530, Vinod Koul wrote:

On 30-11-21, 21:15, Bjorn Andersson wrote:

quoted

On Mon 22 Nov 22:03 CST 2021, Vinod Koul wrote:

quoted

On 22-11-21, 11:05, Katherine Perez wrote:

quoted

TLMM controller base address is incorrect and will hang on some platforms.
Fix by giving the correct address.

Thanks, recheck the spec this looks correct. We should have tlmm reg
space here and not tlmm base which also contains xpu region (thus hang)

Aren't you reading the patch backwards?

I guess :(

quoted

Afaict downstream the driver carries an offset of 0x100000, which we
dropped as we upstreamed the driver. As such changing reg to 0x0f000000
should cause most gpio register accesses to fall outside the actual
register window.

Or perhaps I'm missing something here?

I relooked and XPU is at 0xF000000 and Reg at 0xF100000
So this patch should be dropped as such. The size mentioned in
documentation is also correct

Katherine, can you elaborate more on the hang you have observed? Any
specific pins you use which causes this?

Hi Vinod,

Yes, it seems to hang in msm_pinctrl_probe. Specifically, line 734 in
gpiolib.c: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpio/gpiolib.c#n734.
On i=4, it hangs on assign_bit and the system goes into a reboot loop.
When I set the TLMM address to f000000, I don't see this issue at all.

-- 
~Vinod