Re: [PATCH 2/9] riscv: dts: canaan: Group tuples in interrupt properties

To improve human readability and enable automatic validation, the tuples
in the various properties containing interrupt specifiers should be
grouped.

Fix this by grouping the tuples of "interrupts" and
"interrupts-extended" properties using angle brackets.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/riscv/boot/dts/canaan/k210.dtsi | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi
index 5e8ca8142482153b..56f57118c633b91a 100644
--- a/arch/riscv/boot/dts/canaan/k210.dtsi
+++ b/arch/riscv/boot/dts/canaan/k210.dtsi

@@ -103,8 +103,8 @@ rom0: nvmem@1000 {
 		clint0: timer@2000000 {
 			compatible = "canaan,k210-clint", "sifive,clint0";
 			reg = <0x2000000 0xC000>;
-			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
-					      &cpu1_intc 3 &cpu1_intc 7>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>;
 		};
 
 		plic0: interrupt-controller@c000000 {

@@ -113,7 +113,7 @@ plic0: interrupt-controller@c000000 {
 			compatible = "canaan,k210-plic", "sifive,plic-1.0.0";
 			reg = <0xC000000 0x4000000>;
 			interrupt-controller;
-			interrupts-extended = <&cpu0_intc 11 &cpu1_intc 11>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu1_intc 11>;
 			riscv,ndev = <65>;
 		};
 

@@ -130,10 +130,11 @@ gpio0: gpio-controller@38001000 {
 			compatible = "canaan,k210-gpiohs", "sifive,gpio0";
 			reg = <0x38001000 0x1000>;
 			interrupt-controller;
-			interrupts = <34 35 36 37 38 39 40 41
-				      42 43 44 45 46 47 48 49
-				      50 51 52 53 54 55 56 57
-				      58 59 60 61 62 63 64 65>;
+			interrupts = <34>, <35>, <36>, <37>, <38>, <39>, <40>,
+				     <41>, <42>, <43>, <44>, <45>, <46>, <47>,
+				     <48>, <49>, <50>, <51>, <52>, <53>, <54>,
+				     <55>, <56>, <57>, <58>, <59>, <60>, <61>,
+				     <62>, <63>, <64>, <65>;
 			gpio-controller;
 			ngpios = <32>;
 		};

@@ -141,7 +142,7 @@ gpio0: gpio-controller@38001000 {
 		dmac0: dma-controller@50000000 {
 			compatible = "snps,axi-dma-1.01a";
 			reg = <0x50000000 0x1000>;
-			interrupts = <27 28 29 30 31 32>;
+			interrupts = <27>, <28>, <29>, <30>, <31>, <32>;
 			#dma-cells = <1>;
 			clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>;
 			clock-names = "core-clk", "cfgr-clk";

@@ -316,7 +317,7 @@ fpioa: pinmux@502b0000 {
 			timer0: timer@502d0000 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x502D0000 0x100>;
-				interrupts = <14 15>;
+				interrupts = <14>, <15>;
 				clocks = <&sysclk K210_CLK_TIMER0>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";

@@ -326,7 +327,7 @@ timer0: timer@502d0000 {
 			timer1: timer@502e0000 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x502E0000 0x100>;
-				interrupts = <16 17>;
+				interrupts = <16>, <17>;
 				clocks = <&sysclk K210_CLK_TIMER1>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";

@@ -336,7 +337,7 @@ timer1: timer@502e0000 {
 			timer2: timer@502f0000 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x502F0000 0x100>;
-				interrupts = <18 19>;
+				interrupts = <18>, <19>;
 				clocks = <&sysclk K210_CLK_TIMER2>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";