Thread (15 messages) 15 messages, 4 authors, 2021-11-10

Re: [PATCH v2 3/5] pinctrl: renesas: pinctrl-rzg2l: Add support to get/set pin config for GPIO port pins

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-11-08 15:36:13
Also in: linux-gpio, linux-renesas-soc, lkml

Hi Prabhakar,

On Fri, Oct 29, 2021 at 2:44 PM Lad Prabhakar
[off-list ref] wrote:
Add support to get/set pin config for GPIO port pins.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Thanks for your patch!
quoted hunk ↗ jump to hunk
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
quoted hunk ↗ jump to hunk
@@ -495,6 +512,14 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
                port = RZG2L_SINGLE_PIN_GET_PORT(*pin_data);
                cfg = RZG2L_SINGLE_PIN_GET_CFGS(*pin_data);
                bit = RZG2L_SINGLE_PIN_GET_BIT(*pin_data);
+       } else {
+               cfg = RZG2L_GPIO_PORT_GET_CFGS(*pin_data);
+               port = RZG2L_PIN_ID_TO_PORT(_pin);
+               bit = RZG2L_PIN_ID_TO_PIN(_pin);
+               port_pin = true;
Instead of setting this flag, perhaps port should be adjusted?
Then rzg2l_r{ead,mw}_pin_config() don't have to care about that
anymore.
quoted hunk ↗ jump to hunk
+
+               if (rzg2l_validate_gpio_pin(pctrl, *pin_data, port, bit))
+                       return -EINVAL;
        }

        switch (param) {
@@ -557,6 +582,14 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
                port = RZG2L_SINGLE_PIN_GET_PORT(*pin_data);
                cfg = RZG2L_SINGLE_PIN_GET_CFGS(*pin_data);
                bit = RZG2L_SINGLE_PIN_GET_BIT(*pin_data);
+       } else {
+               cfg = RZG2L_GPIO_PORT_GET_CFGS(*pin_data);
+               port = RZG2L_PIN_ID_TO_PORT(_pin);
+               bit = RZG2L_PIN_ID_TO_PIN(_pin);
+               port_pin = true;
Likewise.
+
+               if (rzg2l_validate_gpio_pin(pctrl, *pin_data, port, bit))
+                       return -EINVAL;
        }

        for (i = 0; i < num_configs; i++) {
Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help