Re: [PATCH v2 11/13] mmc: sdhci-esdhc-imx: Add sdhc support for i.MXRT series
From: Fabio Estevam <festevam@gmail.com>
Date: 2021-11-02 23:17:34
Also in:
linux-arm-kernel, linux-clk, linux-gpio, linux-mmc, linux-serial, lkml
On Tue, Nov 2, 2021 at 7:57 PM Jesse Taube [off-list ref] wrote:
quoted hunk ↗ jump to hunk
static struct esdhc_soc_data usdhc_imx8qxp_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING@@ -357,6 +363,7 @@ static const struct of_device_id imx_esdhc_dt_ids[] = { { .compatible = "fsl,imx7ulp-usdhc", .data = &usdhc_imx7ulp_data, }, { .compatible = "fsl,imx8qxp-usdhc", .data = &usdhc_imx8qxp_data, }, { .compatible = "fsl,imx8mm-usdhc", .data = &usdhc_imx8mm_data, }, + { .compatible = "fsl,imxrt-usdhc", .data = &usdhc_imxrt_data, },
I thought Rob suggested to use the SoC name, so this would be:
{ .compatible = "fsl,imxrt1050-usdhc", .data = &usdhc_imxrt1050_data, },
The same applies to the other bindings in the series.
This way it would be possible to differentiate between future
supported i.MX RT devices.