[net-next PATCH 13/13] Documentation: devicetree: net: dsa: qca8k: document open drain binding
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: 2021-10-06 22:37:38
Also in:
lkml, netdev
Subsystem:
networking drivers, networking [dsa], open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Document new binding qca,power_on_sel used to enable Power-on-strapping select reg and qca,led_open_drain to set led to open drain mode. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- Documentation/devicetree/bindings/net/dsa/qca8k.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
index 550f4313c6e0..4f6ef9f9e024 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt@@ -13,6 +13,10 @@ Required properties: Optional properties: - reset-gpios: GPIO to be used to reset the whole device +- qca,package48: Set to 48-pin mode required in some QCA8327 switches. +- qca,power-on-sel: Enable Power-on-strapping select required in some QCA8327 + switches. +- qca,led-open-drain: Set leds to open-drain mode. - qca,mac6-exchange: Internally swap MAC0 and MAC6. - qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge. - qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge.
--
2.32.0