RE: [EXT] [PATCH v2 16/16] ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash
From: Kuldeep Singh <hidden>
Date: 2021-10-01 05:15:14
Also in:
linux-arm-kernel, lkml
-----Original Message----- From: Li Yang <redacted> Sent: Friday, October 1, 2021 5:34 AM To: Shawn Guo <shawnguo@kernel.org>; Rob Herring [off-list ref]; devicetree@vger.kernel.org; Oleksij Rempel [off-list ref]; linux-arm-kernel@lists.infradead.org; linux- kernel@vger.kernel.org Cc: Leo Li <redacted> Subject: [EXT] [PATCH v2 16/16] ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash Caution: EXT Email We cannot list all the possible chips used in different board revisions, just use the generic "jedec,spi-nor" compatible instead. This also fixes dtbs_check error: ['s25fl256s1', 's25fl512s', 'jedec,spi-nor'] is too long Signed-off-by: Li Yang <redacted>
Reviewed-by: Kuldeep Singh <redacted>
quoted hunk ↗ jump to hunk
--- arch/arm/boot/dts/ls1021a-tsn.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts index 8005efc5c812..ff0ffb22768b 100644--- a/arch/arm/boot/dts/ls1021a-tsn.dts +++ b/arch/arm/boot/dts/ls1021a-tsn.dts@@ -251,7 +251,7 @@ &qspi { flash@0 { /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ - compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; + compatible = "jedec,spi-nor"; spi-max-frequency = <20000000>; #address-cells = <1>; #size-cells = <1>; --2.25.1