Hi Nicolas,

Am 04.09.21 um 16:52 schrieb nicolas saenz julienne:

On Sat, 2021-08-07 at 13:06 +0200, Stefan Wahren wrote:

quoted

This adds the matching carrier for Raspberry Pi Compute Module 4.
Instead of xHCI USB host controller there is just a USB 2.0 interface
connected to the DWC2 controller from the BCM2711. As a result
there is a free PCIe Gen 2 socket. Also there are 2 full-size HDMI 2.0
connectors.

Signed-off-by: Stefan Wahren <redacted>
---

A general note: the CM4 carrier board contains an RTC and a simple fan
controller, which will need to be enabled further down the road.

yes i forgot to mention that i left out these parts because they are
connected to the VideoCore I2C. But yes, this could be added later ...

Best regards
Stefan

Regards,
Nicolas


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel