On Sat, 2021-08-07 at 13:06 +0200, Stefan Wahren wrote:

This adds the matching carrier for Raspberry Pi Compute Module 4.
Instead of xHCI USB host controller there is just a USB 2.0 interface
connected to the DWC2 controller from the BCM2711. As a result
there is a free PCIe Gen 2 socket. Also there are 2 full-size HDMI 2.0
connectors.

Signed-off-by: Stefan Wahren <redacted>
---

A general note: the CM4 carrier board contains an RTC and a simple fan
controller, which will need to be enabled further down the road.

Regards,
Nicolas