Re: [PATCH] arm64: dts: sc7180: Factor out ti-sn65dsi86 support
From: Stephen Boyd <hidden>
Date: 2021-09-27 19:59:14
Also in:
linux-arm-msm, lkml
Quoting Philip Chen (2021-09-24 16:54:13)
quoted hunk ↗ jump to hunk
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi new file mode 100644 index 000000000000..7b1034a5a8e9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi@@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for the boards with TI sn65dsi86 edp bridge + * + * Copyright 2021 Google LLC. + */ + +&dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +&edp_brij_i2c { + sn65dsi86_bridge: bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>;
Why not move edp_brij_en as well? I think you want to reuse the node name for the other bridge, but it doesn't make sense unless that other patch is part of this series.
+ gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;