Re: [PATCH] dt-bindings: display/bridge: document enable-panel for, sn65dsi83
flat view
From: Rob Herring <robh@kernel.org>
Date: 2021-08-25 16:26:16
On Wed, Aug 25, 2021 at 12:21:44PM +0200, Daniels Umanovskis wrote:
The driver supports an optional GPIO specifier for a pin that enables the connected panel, but it's not documented in dt-bindings
The subject looks mangled with the ',' and 'ti' is missing. (There's a common issue with a space getting inserted after a comma on some maillists like dridevel, but the DT list doesn't have that issue.)
quoted hunk ↗ jump to hunk
Signed-off-by: Daniels Umanovskis <redacted> --- .../devicetree/bindings/display/bridge/ti,sn65dsi83.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml index d101233ae17..1aca6c1a8e0 100644--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml@@ -32,6 +32,10 @@ properties:maxItems: 1 description: GPIO specifier for bridge_en pin (active high). + enable-panel-gpios: + maxItems: 1 + description: GPIO specifier for the panel's enable pin (active high). +
There's already the common 'enable-gpios' property. Use that.
ports: $ref: /schemas/graph.yaml#/properties/ports -- 2.30.2