[PATCH v2 09/18] arm64: dts: qcom: sm6350: Add TSENS nodes
From: Konrad Dybcio <hidden>
Date: 2021-08-28 13:19:42
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Add nodes required for TSENS block using the common qcom,tsens-v2 binding. Signed-off-by: Konrad Dybcio <redacted> --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index d945a44e63df..986d7fb01cbb 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi@@ -515,6 +515,28 @@ pdc: interrupt-controller@b220000 { interrupt-controller; }; + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm6350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm6350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + tlmm: pinctrl@f100000 { compatible = "qcom,sm6350-tlmm"; reg = <0 0x0f100000 0 0x300000>;
--
2.33.0