[PATCH v2 21/29] iommu/mediatek: Just move code position in hw_init
flat view
STALE1833d
SUPERSEDED
From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-08-13 06:56:40
Also in:
linux-arm-kernel, linux-iommu, linux-mediatek, lkml
Subsystem:
iommu subsystem, mediatek iommu driver, the rest · Maintainers:
Joerg Roedel, Will Deacon, Yong Wu, Linus Torvalds
Revision v2 of 6 in this series.
Revisions (6)
No functional change too. mt8195 IOMMU support bank functions. some global control settings are in bank0. and the other banks have their bank independent setting. Here only move the global control settings and the independent registers together. Signed-off-by: Yong Wu <yong.wu@mediatek.com> --- drivers/iommu/mtk_iommu.c | 48 +++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 48162e156486..26ac7c4cc3fe 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c@@ -750,30 +750,6 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data) } writel_relaxed(regval, data->base + REG_MMU_CTRL_REG); - regval = F_L2_MULIT_HIT_EN | - F_TABLE_WALK_FAULT_INT_EN | - F_PREETCH_FIFO_OVERFLOW_INT_EN | - F_MISS_FIFO_OVERFLOW_INT_EN | - F_PREFETCH_FIFO_ERR_INT_EN | - F_MISS_FIFO_ERR_INT_EN; - writel_relaxed(regval, data->base + REG_MMU_INT_CONTROL0); - - regval = F_INT_TRANSLATION_FAULT | - F_INT_MAIN_MULTI_HIT_FAULT | - F_INT_INVALID_PA_FAULT | - F_INT_ENTRY_REPLACEMENT_FAULT | - F_INT_TLB_MISS_FAULT | - F_INT_MISS_TRANSACTION_FIFO_FAULT | - F_INT_PRETETCH_TRANSATION_FIFO_FAULT; - writel_relaxed(regval, data->base + REG_MMU_INT_MAIN_CONTROL); - - if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_LEGACY_IVRP_PADDR)) - regval = (data->protect_base >> 1) | (data->enable_4GB << 31); - else - regval = lower_32_bits(data->protect_base) | - upper_32_bits(data->protect_base); - writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR); - if (data->enable_4GB && MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_VLD_PA_RNG)) { /*
@@ -807,6 +783,30 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data) } writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL); + regval = F_L2_MULIT_HIT_EN | + F_TABLE_WALK_FAULT_INT_EN | + F_PREETCH_FIFO_OVERFLOW_INT_EN | + F_MISS_FIFO_OVERFLOW_INT_EN | + F_PREFETCH_FIFO_ERR_INT_EN | + F_MISS_FIFO_ERR_INT_EN; + writel_relaxed(regval, data->base + REG_MMU_INT_CONTROL0); + + regval = F_INT_TRANSLATION_FAULT | + F_INT_MAIN_MULTI_HIT_FAULT | + F_INT_INVALID_PA_FAULT | + F_INT_ENTRY_REPLACEMENT_FAULT | + F_INT_TLB_MISS_FAULT | + F_INT_MISS_TRANSACTION_FIFO_FAULT | + F_INT_PRETETCH_TRANSATION_FIFO_FAULT; + writel_relaxed(regval, data->base + REG_MMU_INT_MAIN_CONTROL); + + if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_LEGACY_IVRP_PADDR)) + regval = (data->protect_base >> 1) | (data->enable_4GB << 31); + else + regval = lower_32_bits(data->protect_base) | + upper_32_bits(data->protect_base); + writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR); + if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0, dev_name(data->dev), (void *)data)) { writel_relaxed(0, data->base + REG_MMU_PT_BASE_ADDR);
--
2.18.0