[PATCH v5 21/34] iommu/mediatek: Add PCIe support
From: Yong Wu <yong.wu@mediatek.com>
Date: 2022-02-17 11:39:00
Also in:
linux-devicetree, linux-iommu, linux-mediatek, lkml
Subsystem:
iommu subsystem, mediatek iommu driver, the rest · Maintainers:
Joerg Roedel, Will Deacon, Yong Wu, Linus Torvalds
Currently the code for of_iommu_configure_dev_id is like this:
static int of_iommu_configure_dev_id(struct device_node *master_np,
struct device *dev,
const u32 *id)
{
struct of_phandle_args iommu_spec = { .args_count = 1 };
err = of_map_id(master_np, *id, "iommu-map",
"iommu-map-mask", &iommu_spec.np,
iommu_spec.args);
...
}
It supports only one id output. BUT our PCIe HW has two ID(one is for
writing, the other is for reading). I'm not sure if we should change
of_map_id to support output MAX_PHANDLE_ARGS.
Here add the solution in ourselve drivers. If it's pcie case, enable one
more bit.
Not all infra iommu support PCIe, thus add a PCIe support flag here.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/iommu/mtk_iommu.c | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 15dc8e94d5a2..158185302d53 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c@@ -20,6 +20,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <linux/pci.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/regmap.h>
@@ -134,6 +135,7 @@ #define MTK_IOMMU_TYPE_MASK (0x3 << 13) /* PM and clock always on. e.g. infra iommu */ #define PM_CLK_AO BIT(15) +#define IFA_IOMMU_PCIE_SUPPORT BIT(16) #define MTK_IOMMU_HAS_FLAG(pdata, _x) (!!(((pdata)->flags) & (_x)))
@@ -420,8 +422,11 @@ static int mtk_iommu_config(struct mtk_iommu_data *data, struct device *dev, larb_mmu->mmu &= ~MTK_SMI_MMU_EN(portid); } else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA)) { peri_mmuen_msk = BIT(portid); - peri_mmuen = enable ? peri_mmuen_msk : 0; + /* PCI dev has only one output id, enable the next writing bit for PCIe */ + if (dev_is_pci(dev)) + peri_mmuen_msk |= BIT(portid + 1); + peri_mmuen = enable ? peri_mmuen_msk : 0; ret = regmap_update_bits(data->pericfg, PERICFG_IOMMU_1, peri_mmuen_msk, peri_mmuen); if (ret)
@@ -1050,6 +1055,15 @@ static int mtk_iommu_probe(struct platform_device *pdev) ret = component_master_add_with_match(dev, &mtk_iommu_com_ops, match); if (ret) goto out_bus_set_null; + } else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA) && + MTK_IOMMU_HAS_FLAG(data->plat_data, IFA_IOMMU_PCIE_SUPPORT)) { +#ifdef CONFIG_PCI + if (!iommu_present(&pci_bus_type)) { + ret = bus_set_iommu(&pci_bus_type, &mtk_iommu_ops); + if (ret) /* PCIe fail don't affect platform_bus. */ + goto out_list_del; + } +#endif } return ret;
@@ -1080,6 +1094,11 @@ static int mtk_iommu_remove(struct platform_device *pdev) if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM)) { device_link_remove(data->smicomm_dev, &pdev->dev); component_master_del(&pdev->dev, &mtk_iommu_com_ops); + } else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA) && + MTK_IOMMU_HAS_FLAG(data->plat_data, IFA_IOMMU_PCIE_SUPPORT)) { +#ifdef CONFIG_PCI + bus_set_iommu(&pci_bus_type, NULL); +#endif } pm_runtime_disable(&pdev->dev); devm_free_irq(&pdev->dev, data->irq, data);
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel