Re: [PATCH v6 4/5] dts: marvell: Enable 10G interfaces on 9130-DB and 9131-DB boards
From: "Russell King (Oracle)" <linux@armlinux.org.uk>
Date: 2021-07-08 11:29:03
Also in:
linux-arm-kernel, linux-phy, lkml
On Thu, Jul 08, 2021 at 02:25:27PM +0300, kostap@marvell.com wrote:
quoted hunk ↗ jump to hunk
From: Stefan Chulski <redacted> This patch enables eth0 10G interface on CN9130-DB paltforms and eth0 10G and eth3 10G interfaces on CN9131-DB. Signed-off-by: Stefan Chulski <redacted> Signed-off-by: Konstantin Porotchkin <redacted> --- arch/arm64/boot/dts/marvell/cn9130-db.dtsi | 2 +- arch/arm64/boot/dts/marvell/cn9131-db.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi index 34274e061958..39fc90716454 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi@@ -125,7 +125,7 @@ /* SLM-1521-V2, CON9 */ &cp0_eth0 { - status = "disabled"; + status = "okay"; phy-mode = "10gbase-kr";
Are these really 10gbase-kr? Or should this be 10gbase-r ? -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!