On 6/14/21 8:07 PM, Adam Ford wrote:

On Sat, Jun 12, 2021 at 7:58 AM Peng Fan (OSS) [off-list ref] wrote:

quoted

From: Peng Fan <peng.fan@nxp.com>

The i.MX8MM SoC has dispmix BLK-CTL and vpumix BLK-CTL, so we add
that support in this driver.

Reviewed-by: Abel Vesa <redacted>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

Maybe my TF-A is too old, but I am not able to wake the device from
suspend-to-ram with this series.  I used the device tree from [1] to
enable both the GPCv2 and the blk-ctl stuff.

[1] - https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210604111005.6804-1-peng.fan@oss.nxp.com/

I based both off Shawn's for-next branch.

I also ran into issues with this, although it could also be related to 
GPCv2. On MX8MM , the system sometimes hangs when bringing up the GPCv2 
power domain 6 (VPUMIX). It seems that the GPCv2 driver sets 
GPC_PU_PGC_SW_PUP_REQ register to 0x100 to bring up the VPUMIX and the 
bit never self-clears. After that, it seems the entire GPC locks up. 
Have you ever seen that kind of behavior ?