@@ -15,6 +15,7 @@ on the Qualcomm Hexagon core.
 		    "qcom,msm8996-mss-pil"
 		    "qcom,msm8998-mss-pil"
 		    "qcom,sc7180-mss-pil"
+		    "qcom,sc7280-mss-pil"
 		    "qcom,sdm845-mss-pil"
 
 - reg:

@@ -47,6 +48,7 @@ on the Qualcomm Hexagon core.
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
 	qcom,sc7180-mss-pil:
+	qcom,sc7280-mss-pil:
 	qcom,sdm845-mss-pil:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
 		    "shutdown-ack"

@@ -87,6 +89,8 @@ on the Qualcomm Hexagon core.
 	qcom,sc7180-mss-pil:
 		    must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
 		    "nav"
+	qcom,sc7280-mss-pil:
+		    must be "iface", "xo", "snoc_axi", "offline"
 	qcom,sdm845-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "prng"

@@ -98,7 +102,7 @@ on the Qualcomm Hexagon core.
 		    reference to the list of 3 reset-controllers for the
 		    wcss sub-system
 		    reference to the list of 2 reset-controllers for the modem
-		    sub-system on SC7180, SDM845 SoCs
+		    sub-system on SC7180, SC7280, SDM845 SoCs
 
 - reset-names:
 	Usage: required

@@ -107,7 +111,7 @@ on the Qualcomm Hexagon core.
 		    must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
 		    for the wcss sub-system
 		    must be "mss_restart", "pdc_reset" for the modem
-		    sub-system on SC7180, SDM845 SoCs
+		    sub-system on SC7180, SC7280, SDM845 SoCs
 
 For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
 should be referenced as follows:

@@ -173,6 +177,9 @@ For the compatible string below the following supplies are required:
 	qcom,msm8998-mss-pil:
 		    must be "cx", "mx"
 	qcom,sc7180-mss-pil:
+		    must be "cx", "mx", "mss"
+	qcom,sc7280-mss-pil:
+		    must be "cx", "mss"
 	qcom,sdm845-mss-pil:
 		    must be "cx", "mx", "mss"
 

@@ -198,6 +205,9 @@ For the compatible string below the following supplies are required:
 	Definition: a phandle reference to a syscon representing TCSR followed
 		    by the three offsets within syscon for q6, modem and nc
 		    halt registers.
+		    a phandle reference to a syscon representing TCSR followed
+		    by the four offsets within syscon for q6, modem, nc and vq6
+		    halt registers on SC7280 SoCs.
 
 For the compatible strings below the following phandle references are required:
   "qcom,sc7180-mss-pil"

@@ -208,6 +218,24 @@ For the compatible strings below the following phandle references are required:
 		    by the offset within syscon for conn_box_spare0 register
 		    used by the modem sub-system running on SC7180 SoC.
 
+For the compatible strings below the following phandle references are required:
+  "qcom,sc7280-mss-pil"
+- qcom,ext-regs:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: two phandles reference to syscons representing TCSR_REG and
+		    TCSR register space followed by the two offset within the syscon
+		    to force_clk_en/rscc_disable and axim1_clk_off/crypto_clk_off
+		    registers respectively.
+
+- qcom,qaccept-regs:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: a phandle reference to a syscon representing TCSR followed
+		    by the three offsets within syscon for mdm, cx and axi
+		    qaccept registers used by the modem sub-system running on
+		    SC7280 SoC.
+
 The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
 on platforms which do not have TrustZone.