[PATCH v4 6/6] ARM: tegra: Add SoC thermal sensor to Tegra30 device-trees
From: Dmitry Osipenko <digetx@gmail.com>
Date: 2021-06-16 19:05:49
Also in:
linux-pm, linux-tegra, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add the on-chip SoC thermal sensor to Tegra30 device-trees. Now CPU temperature reporting and thermal throttling is available on all Tegra30 devices universally. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- arch/arm/boot/dts/tegra30.dtsi | 87 ++++++++++++++++++++++++++++++++-- 1 file changed, 83 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index c577c191be4b..404b6ecc9c20 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi@@ -5,6 +5,7 @@ #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/soc/tegra-pmc.h> +#include <dt-bindings/thermal/thermal.h> #include "tegra30-peripherals-opp.dtsi"
@@ -800,6 +801,20 @@ fuse@7000f800 { reset-names = "fuse"; }; + tsensor: tsensor@70014000 { + compatible = "nvidia,tegra30-tsensor"; + reg = <0x70014000 0x500>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_TSENSOR>; + resets = <&tegra_car TEGRA30_CLK_TSENSOR>; + + assigned-clocks = <&tegra_car TEGRA30_CLK_TSENSOR>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_CLK_M>; + assigned-clock-rates = <500000>; + + #thermal-sensor-cells = <1>; + }; + hda@70030000 { compatible = "nvidia,tegra30-hda"; reg = <0x70030000 0x10000>;
@@ -1062,32 +1077,36 @@ cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; + #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; + #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; + #cooling-cells = <2>; }; };
@@ -1102,4 +1121,64 @@ pmu { <&{/cpus/cpu@2}>, <&{/cpus/cpu@3}>; }; + + thermal-zones { + tsensor-channel0 { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsensor 0>; + + trips { + level1_trip: dvfs-alert { + /* throttle at 80C until temperature drops to 79.8C */ + temperature = <80000>; + hysteresis = <200>; + type = "passive"; + }; + + level2_trip: cpu-div2-throttle { + /* hardware CPU x2 freq throttle at 85C */ + temperature = <85000>; + hysteresis = <200>; + type = "hot"; + }; + + level3_trip: soc-critical { + /* hardware shut down at 90C */ + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&level1_trip>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&actmon THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + tsensor-channel1 { + status = "disabled"; + + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <0>; /* milliseconds */ + + thermal-sensors = <&tsensor 1>; + + trips { + dvfs-alert { + temperature = <80000>; + hysteresis = <200>; + type = "passive"; + }; + }; + }; + }; };
--
2.30.2