[PATCH next 12/15] ARM: dts: am335x-phycore: switch to new cpsw switch drv
From: Grygorii Strashko <grygorii.strashko@ti.com>
Date: 2021-06-12 01:16:26
Also in:
linux-omap, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The dual_mac mode has been preserved the same way between legacy and new driver, and one port devices works the same as 1 dual_mac port - it's safe to switch drivers. So, switch Phytec AM335x phyCORE SOM, phyBOARD-WEGA, phyBOARD-REGOR, PCM-953 to use new cpsw switch driver. Those boards have or 2 Ext. port wired and configured in dual_mac mode by default, or only 1 Ext. port. Cc: Teresa Remmet <redacted> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm/boot/dts/am335x-pcm-953.dtsi | 10 ++++------ arch/arm/boot/dts/am335x-phycore-som.dtsi | 14 ++++++++------ arch/arm/boot/dts/am335x-regor.dtsi | 11 +++++------ arch/arm/boot/dts/am335x-wega.dtsi | 11 +++++------ 4 files changed, 22 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
index 6c547c83e5dd..124026fa0d09 100644
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi@@ -123,24 +123,22 @@ }; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <&phy1>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { phy1: ethernet-phy@2 { reg = <2>; }; }; -&mac { - slaves = <2>; +&mac_sw { pinctrl-names = "default"; pinctrl-0 = <ðernet0_pins ðernet1_pins>; - dual_emac; }; /* Misc */
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 7e46b4c02709..f65cd1331315 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi@@ -97,24 +97,26 @@ }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&phy0>; phy-mode = "rmii"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&davinci_mdio { +&cpsw_port2 { + status = "disabled"; +}; + +&davinci_mdio_sw { pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; - status = "okay"; phy0: ethernet-phy@0 { reg = <0>; }; }; -&mac { - slaves = <1>; +&mac_sw { pinctrl-names = "default"; pinctrl-0 = <ðernet0_pins>; status = "okay";
diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi
index 6fbf4ac739e7..7b3966ee51b9 100644
--- a/arch/arm/boot/dts/am335x-regor.dtsi
+++ b/arch/arm/boot/dts/am335x-regor.dtsi@@ -85,23 +85,22 @@ }; }; -&cpsw_emac1 { +&cpsw_port2 { + status = "okay"; phy-handle = <&phy1>; phy-mode = "mii"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { phy1: ethernet-phy@1 { reg = <1>; }; }; -&mac { - slaves = <2>; +&mac_sw { pinctrl-names = "default"; pinctrl-0 = <ðernet0_pins ðernet1_pins>; - dual_emac = <1>; }; /* GPIOs */
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 1359bf8715e6..673159d93a6a 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi@@ -111,23 +111,22 @@ }; }; -&cpsw_emac1 { +&cpsw_port2 { + status = "okay"; phy-handle = <&phy1>; phy-mode = "mii"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { phy1: ethernet-phy@1 { reg = <1>; }; }; -&mac { - slaves = <2>; +&mac_sw { pinctrl-names = "default"; pinctrl-0 = <ðernet0_pins ðernet1_pins>; - dual_emac = <1>; }; /* MMC */
--
2.17.1