[PATCH next 10/15] ARM: dts: am335x-pdu001: switch to new cpsw switch drv
From: Grygorii Strashko <grygorii.strashko@ti.com>
Date: 2021-06-12 01:16:03
Also in:
linux-omap, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The dual_mac mode has been preserved the same way between legacy and new driver, and one port devices works the same as 1 dual_mac port - it's safe to switch drivers. So, switch EETS,PDU001 to use new cpsw switch driver. Those boards have or 2 Ext. port wired and configured in dual_mac mode by default, or only 1 Ext. port. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm/boot/dts/am335x-pdu001.dts | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index d41a5ffd83cf..b793beeab245 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts@@ -494,17 +494,15 @@ }; }; -&mac { +&mac_sw { pinctrl-names = "default"; pinctrl-0 = <&cpsw_default>; - dual_emac; /* no switch, two distinct MACs */ status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; - status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>;
@@ -515,16 +513,16 @@ }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "mii"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "mii"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; &tscadc {
--
2.17.1