Re: [PATCH v2 2/5] ARM: dts: NSP: Add Meraki MX64/MX65 to Makefile
From: Vladimir Oltean <olteanv@gmail.com>
Date: 2021-06-11 20:24:40
Also in:
linux-arm-kernel, lkml
On Fri, Jun 11, 2021 at 12:27:14AM +0100, Matthew Hagan wrote:
quoted hunk ↗ jump to hunk
Add Makefile entries for the Meraki MX64/MX65 series devices. Signed-off-by: Matthew Hagan <redacted> --- arch/arm/boot/dts/Makefile | 6 ++++++ 1 file changed, 6 insertions(+)diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f8f09c5066e7..033d9604db60 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile@@ -154,6 +154,12 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \ bcm958525xmc.dtb \ bcm958622hr.dtb \ bcm958623hr.dtb \ + bcm958625-meraki-mx64.dtb \ + bcm958625-meraki-mx64-a0.dtb \ + bcm958625-meraki-mx64w.dtb \ + bcm958625-meraki-mx64w-a0.dtb \ + bcm958625-meraki-mx65.dtb \ + bcm958625-meraki-mx65w.dtb \ bcm958625hr.dtb \ bcm988312hr.dtb \ bcm958625k.dtb-- 2.26.3
It is odd to add the device trees to the Makefile in a separate patch compared to their actual introduction. Does the tree even compile at this stage?