[PATCH 6/7] dt-bindings: imx6q-pcie: add compatibles for i.MX8MM PCIe
From: Lucas Stach <l.stach@pengutronix.de>
Date: 2021-05-10 14:55:12
Also in:
linux-pci
Subsystem:
open firmware and flattened device tree bindings, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
This adds compatibles for both the PCIe host controller and PCIe PHY found on the i.MX8MM SoC. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index 3ebd8553a818..f1f5651031a5 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt@@ -10,6 +10,7 @@ Required properties: - "fsl,imx6qp-pcie" - "fsl,imx7d-pcie" - "fsl,imx8mq-pcie" + - "fsl,imx8mm-pcie" - reg: base address and length of the PCIe controller - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property.
@@ -90,12 +91,13 @@ Example: clock-names = "pcie", "pcie_bus", "pcie_phy"; }; -* Freescale i.MX7d PCIe PHY +* Freescale i.MX PCIe PHY -This is the PHY associated with the IMX7d PCIe controller. It's looked up by -the PCI-e controller via the fsl,imx7d-pcie-phy compatible. +This is the PHY associated with the IMX PCIe controller. It's looked up by +the PCI-e controller via the compatible. Required properties: - compatible: - "fsl,imx7d-pcie-phy" + - "fsl,imx8mm-pcie-phy" - reg: base address and length of the PCIe PHY controller
--
2.29.2