Thread (9 messages) 9 messages, 2 authors, 2021-05-26

Re: [v4,PATCH 2/3] drm/mediatek: config driver data to support dual edge sample

From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Date: 2021-05-26 02:47:25
Also in: linux-arm-kernel, linux-mediatek, lkml

Hi, Rex:

Rex-BC Chen [off-list ref] 於 2021年5月25日 週二 下午8:15寫道:
quoted hunk ↗ jump to hunk
Add output_fmts and num_output_fmts value for all configuration.

Signed-off-by: Jitao Shi <redacted>
Signed-off-by: Rex-BC Chen <redacted>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index d3b883c97aaf..d6a422986efc 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -695,10 +695,21 @@ static unsigned int mt8183_calculate_factor(int clock)
                return 2;
 }

+static const u32 mt8173_output_fmts[] = {
+MEDIA_BUS_FMT_RGB888_1X24,
indent.
+};
+
+static const u32 mt8183_output_fmts[] = {
+MEDIA_BUS_FMT_RGB888_2X12_LE,
+MEDIA_BUS_FMT_RGB888_2X12_BE,
ditto.

Regards,
Chun-Kuang.
quoted hunk ↗ jump to hunk
+};
+
 static const struct mtk_dpi_conf mt8173_conf = {
        .cal_factor = mt8173_calculate_factor,
        .reg_h_fre_con = 0xe0,
        .max_clock_khz = 300000,
+       .output_fmts = mt8173_output_fmts,
+       .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
 };

 static const struct mtk_dpi_conf mt2701_conf = {
@@ -706,18 +717,24 @@ static const struct mtk_dpi_conf mt2701_conf = {
        .reg_h_fre_con = 0xb0,
        .edge_sel_en = true,
        .max_clock_khz = 150000,
+       .output_fmts = mt8173_output_fmts,
+       .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
 };

 static const struct mtk_dpi_conf mt8183_conf = {
        .cal_factor = mt8183_calculate_factor,
        .reg_h_fre_con = 0xe0,
        .max_clock_khz = 100000,
+       .output_fmts = mt8183_output_fmts,
+       .num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
 };

 static const struct mtk_dpi_conf mt8192_conf = {
        .cal_factor = mt8183_calculate_factor,
        .reg_h_fre_con = 0xe0,
        .max_clock_khz = 150000,
+       .output_fmts = mt8173_output_fmts,
+       .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
 };

 static int mtk_dpi_probe(struct platform_device *pdev)
--
2.18.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help