The "meat" of this series is in the last patch which is the change that
actually starts making use of the interrupts to drive a state machine.
The dt-bindings patches can probably go in at any time, the rest of the
series isn't dependent on them.

I've tested on T2081 and P2041 based systems with a number of i2c and smbus
devices.

Chris Packham (6):
  dt-bindings: i2c-mpc: Document interrupt property as required
  dt-bindings: i2c: convert i2c-mpc to json-schema
  i2c: mpc: Make use of i2c_recover_bus()
  i2c: mpc: make interrupt mandatory and remove polling code
  i2c: mpc: use device managed APIs
  i2c: mpc: Interrupt driven transfer

 .../devicetree/bindings/i2c/i2c-mpc.txt       |  62 ---
 .../devicetree/bindings/i2c/i2c-mpc.yaml      |  91 +++
 drivers/i2c/busses/i2c-mpc.c                  | 517 ++++++++++--------
 3 files changed, 369 insertions(+), 301 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-mpc.txt
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mpc.yaml

-- 
2.31.0