Thread (6 messages) flat view 6 messages, 2 authors, 2021-03-17

RE: [PATCH V5 0/2] power: bq27xxx: add bq78z100

From: LI Qingwu <hidden>
Date: 2021-03-15 07:53:14
Also in: linux-pm, lkml

Hi Sebastian,

Thanks for your input, I will and dump message into next version patch.



Best Regards

**********************************************
Li Qingwu (Terry)
Senior Embedded Software Engineer 
Leica Geosystems(Shanghai)Co.,Limited
(Tel): +86 21 61061036
(FAX): +86 21 61061008
(Mobile): +86 187 0185 9600
E-mail: Qing-wu.Li@leica-geosystems.com.cn
Http: www.leica-geosystems.com.cn
**********************************************

-----Original Message-----
From: Sebastian Reichel <sre@kernel.org> 
Sent: Monday, March 15, 2021 7:42 AM
To: LI Qingwu <redacted>
Cc: robh+dt@kernel.org; pali@kernel.org; krzk@kernel.org; afd@ti.com; linux-pm@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; TERTYCHNYI Grygorii <redacted>; ZHIZHIKIN Andrey <redacted>
Subject: Re: [PATCH V5 0/2] power: bq27xxx: add bq78z100

Hi,

On Fri, Mar 05, 2021 at 06:49:47AM +0000, LI Qingwu wrote:
Changes in V5:

1. Change [BQ27XXX_REG_TTES] from INVALID_REG_ADDR to 0x1c, the 
StandbyTimeToEmpty command of bq78z100.
2. Add [BQ27XXX_REG_RC] = 0x10. the RemainingCapacity command of 
bq78z100.
3. Set [BQ27XXX_REG_AE] to INVALID_REG_ADDR, support by bq78z100.
4. Delete property POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, not support by 
bq78z100
I also asked to check other exposed properties and to provide a dump of the power-supply uevent in commit message or cover letter to verify chip works as expected. I cannot see the dump and you are exposing at least one property that always reports -ENODATA. I intentionally will not point out the exact property, so that you have to properly test your patch before submitting.

Thanks,

-- Sebastian
LI Qingwu (2):
  dt-bindings: power: bq27xxx: add bq78z100
  power: supply: bq27xxx: Add support for BQ78Z100

 .../bindings/power/supply/bq27xxx.yaml        |  1 +
 drivers/power/supply/bq27xxx_battery.c        | 44 +++++++++++++++++++
 drivers/power/supply/bq27xxx_battery_i2c.c    |  2 +
 include/linux/power/bq27xxx_battery.h         |  1 +
 4 files changed, 48 insertions(+)

--
2.17.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help