Re: [PATCH V5 0/2] power: bq27xxx: add bq78z100

Hi,

On Fri, Mar 05, 2021 at 06:49:47AM +0000, LI Qingwu wrote:

Changes in V5:

1. Change [BQ27XXX_REG_TTES] from INVALID_REG_ADDR to 0x1c,
the StandbyTimeToEmpty command of bq78z100.
2. Add [BQ27XXX_REG_RC] = 0x10. the RemainingCapacity command of
bq78z100.
3. Set [BQ27XXX_REG_AE] to INVALID_REG_ADDR, support by bq78z100.
4. Delete property POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, not support
by bq78z100

I also asked to check other exposed properties and to provide
a dump of the power-supply uevent in commit message or cover
letter to verify chip works as expected. I cannot see the dump
and you are exposing at least one property that always reports
-ENODATA. I intentionally will not point out the exact property,
so that you have to properly test your patch before submitting.

Thanks,

-- Sebastian

LI Qingwu (2):
  dt-bindings: power: bq27xxx: add bq78z100
  power: supply: bq27xxx: Add support for BQ78Z100

 .../bindings/power/supply/bq27xxx.yaml        |  1 +
 drivers/power/supply/bq27xxx_battery.c        | 44 +++++++++++++++++++
 drivers/power/supply/bq27xxx_battery_i2c.c    |  2 +
 include/linux/power/bq27xxx_battery.h         |  1 +
 4 files changed, 48 insertions(+)

-- 
2.17.1