Re: [PATCH v3 2/3] dt-bindings: usb: generic-ehci: document spurious-oc flag
From: Álvaro Fernández Rojas <hidden>
Date: 2021-02-24 07:21:30
Also in:
linux-arm-kernel, linux-usb, lkml
I didn’t change this, but I missed Alan’s Acked-by, so: Acked-by: Alan Stern <stern@rowland.harvard.edu>
quoted hunk ↗ jump to hunk
El 23 feb 2021, a las 18:44, Álvaro Fernández Rojas [off-list ref] escribió: Over-current reporting isn't supported on some platforms such as bcm63xx. These devices will incorrectly report over-current if this flag isn't properly activated. Signed-off-by: Álvaro Fernández Rojas <redacted> --- v3: no changes. v2: change flag name and improve documentation as suggested by Alan Stern. Documentation/devicetree/bindings/usb/generic-ehci.yaml | 6 ++++++ 1 file changed, 6 insertions(+)diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index cf83f2d9afac..8089dc956ba3 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml@@ -122,6 +122,12 @@ properties: description: Set this flag to force EHCI reset after resume. + spurious-oc: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set this flag to indicate that the hardware sometimes turns on + the OC bit when an over-current isn't actually present. + companion: $ref: /schemas/types.yaml#/definitions/phandle description:-- 2.20.1