Re: [PATCH 1/2] dt-bindings: usb: generic-ehci: document ignore-oc flag
From: Alan Stern <stern@rowland.harvard.edu>
Date: 2021-02-23 15:56:01
Also in:
linux-arm-kernel, linux-usb, lkml
On Tue, Feb 23, 2021 at 04:50:04PM +0100, Álvaro Fernández Rojas wrote:
quoted hunk ↗ jump to hunk
Over-current reporting isn't supported on some platforms such as bcm63xx. These devices will incorrectly report over-current if this flag isn't properly activated. Signed-off-by: Álvaro Fernández Rojas <redacted> --- Documentation/devicetree/bindings/usb/generic-ehci.yaml | 5 +++++ 1 file changed, 5 insertions(+)diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index cf83f2d9afac..294bbf02399e 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml@@ -117,6 +117,11 @@ properties: Set this flag if EHCI has a Transaction Translator built into the root hub. + ignore-oc: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set this flag for HCDs without over-current reporting support.
This is not a good description of a device property. DT entries are supposed to described the hardware, not talk about how to use it. When you say that the bcm63xx doesn't support over-current reporting, what exactly do you mean? Do you mean that sometimes the hardware turns on the over-current bit when an over-current isn't actually present? Or do you mean something else? Alan Stern
+
needs-reset-on-resume:
$ref: /schemas/types.yaml#/definitions/flag
description:
--
2.20.1