Hi Vincent,

On Tue, Feb 09, 2021 at 07:58:33PM +0100, Vincent Knecht wrote:

Le mardi 09 février 2021 à 10:13 -0600, Rob Herring a écrit :

quoted

On Thu, Jan 21, 2021 at 06:43:47PM +0100, Vincent Knecht wrote:

quoted

This adds dts bindings for the mstar msg26xx touchscreen.

Signed-off-by: Vincent Knecht <redacted>
---
Changed in v3:
- added `touchscreen-size-x: true` and `touchscreen-size-y: true` properties
Changed in v2:
- changed M-Star to MStar in title line
- changed reset gpio to active-low in example section
---
 .../input/touchscreen/mstar,msg26xx.yaml      | 69 +++++++++++++++++++
 1 file changed, 69 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml

diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml

b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml
new file mode 100644
index 000000000000..5d26a1008bf1

--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml

@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/mstar,msg26xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar msg26xx touchscreen controller Bindings
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: mstar,msg26xx

Don't use wildcards in compatible strings.

Thank you for the input...

Let's say I set it to "mstar,msg2638", is it better to rename the driver file and functions too ?
According to downstream source file naming, msg2638 is the model I have and test this driver with.

This is ultimately Dmitry's call, but it's fairly common to use wildcards
for driver names and function calls if the driver is known to work across
all devices that fit in the wildcard (see iqs5xx and many others).

The risk with wildcards, however, is that vendors can introduce different
devices later with similar part numbers. Therefore, some subsystems (e.g.
iio) tend to frown upon wildcards for that reason.

You should try and make the driver cover as many devices as possible. But
if the driver is only known to work for one device then I don't think you
can use a wildcard in the name unless you support all other devices (just
my opinion).

In either case, however, compatible strings must be unique just as with a
part number in a schematic or bill of materials. As such, it is perfectly
fine to have multiple compatible strings in a single driver.

There's a possibility this driver works as-is or with minor mods for msg2633 too,
and a more remote one for msg21xx and msg22xx...

Kind regards,
Jeff LaBundy