Le mardi 09 février 2021 à 10:13 -0600, Rob Herring a écrit :
On Thu, Jan 21, 2021 at 06:43:47PM +0100, Vincent Knecht wrote:
quoted
This adds dts bindings for the mstar msg26xx touchscreen.
Signed-off-by: Vincent Knecht <redacted>
---
Changed in v3:
- added `touchscreen-size-x: true` and `touchscreen-size-y: true` properties
Changed in v2:
- changed M-Star to MStar in title line
- changed reset gpio to active-low in example section
---
.../input/touchscreen/mstar,msg26xx.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml
b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml
new file mode 100644
index 000000000000..5d26a1008bf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/mstar,msg26xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar msg26xx touchscreen controller Bindings
+
+maintainers:
+ - Vincent Knecht <vincent.knecht@mailoo.org>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ const: mstar,msg26xx
Don't use wildcards in compatible strings.
Thank you for the input...
Let's say I set it to "mstar,msg2638", is it better to rename the driver file and functions too ?
According to downstream source file naming, msg2638 is the model I have and test this driver with.
There's a possibility this driver works as-is or with minor mods for msg2633 too,
and a more remote one for msg21xx and msg22xx...