[PATCH v3 2/2] rtc: pcf2127: only use watchdog when explicitly available

From: Uwe Kleine-König <redacted>

Most boards using the pcf2127 chip (in my bubble) don't make use of the
watchdog functionality and the respective output is not connected. The
effect on such a board is that there is a watchdog device provided that
doesn't work.

So only register the watchdog if the device tree has a "reset-source"
property.

Signed-off-by: Uwe Kleine-König <redacted>
[RV: s/has-watchdog/reset-source/]
Signed-off-by: Rasmus Villemoes <redacted>
---
 drivers/rtc/rtc-pcf2127.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index 33fa8b17b79c..39a7b5116aa4 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c

@@ -336,7 +336,8 @@ static int pcf2127_watchdog_init(struct device *dev, struct pcf2127 *pcf2127)
 	u32 wdd_timeout;
 	int ret;
 
-	if (!IS_ENABLED(CONFIG_WATCHDOG))
+	if (!IS_ENABLED(CONFIG_WATCHDOG) ||
+	    !device_property_read_bool(dev, "reset-source"))
 		return 0;
 
 	pcf2127->wdd.parent = dev;

-- 
2.23.0