Re: [PATCH v3 1/6] dt-bindings: mux-j7200-wiz: Add lane function defines

Hi Peter & Nishanth,

On 16/09/2020 18:45, Nishanth Menon wrote:

On 06:52-20200916, Peter Rosin wrote:

quoted

Hi,

Sorry for the delay.

On 2020-09-15 13:20, Roger Quadros wrote:

quoted

Each SERDES lane mux can select upto 4 different IPs.
There are 4 lanes in each J7200 SERDES. Define all
the possible functions in this file.

Cc: Peter Rosin <redacted>
Signed-off-by: Roger Quadros <redacted>
---
  include/dt-bindings/mux/mux-j7200-wiz.h | 29 +++++++++++++++++++++++++
  1 file changed, 29 insertions(+)
  create mode 100644 include/dt-bindings/mux/mux-j7200-wiz.h

diff --git a/include/dt-bindings/mux/mux-j7200-wiz.h b/include/dt-bindings/mux/mux-j7200-wiz.h
new file mode 100644
index 000000000000..b091b1185a36
--- /dev/null
+++ b/include/dt-bindings/mux/mux-j7200-wiz.h

@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for J7200 WIZ.
+ */
+
+#ifndef _DT_BINDINGS_J7200_WIZ
+#define _DT_BINDINGS_J7200_WIZ
+
+#define SERDES0_LANE0_QSGMII_LANE3	0x0
+#define SERDES0_LANE0_PCIE1_LANE0	0x1
+#define SERDES0_LANE0_IP3_UNUSED	0x2
+#define SERDES0_LANE0_IP4_UNUSED	0x3
+
+#define SERDES0_LANE1_QSGMII_LANE4	0x0
+#define SERDES0_LANE1_PCIE1_LANE1	0x1
+#define SERDES0_LANE1_IP3_UNUSED	0x2
+#define SERDES0_LANE1_IP4_UNUSED	0x3
+
+#define SERDES0_LANE2_QSGMII_LANE1	0x0
+#define SERDES0_LANE2_PCIE1_LANE2	0x1
+#define SERDES0_LANE2_IP3_UNUSED	0x2
+#define SERDES0_LANE2_IP4_UNUSED	0x3
+
+#define SERDES0_LANE3_QSGMII_LANE2	0x0
+#define SERDES0_LANE3_PCIE1_LANE3	0x1
+#define SERDES0_LANE3_USB		0x2
+#define SERDES0_LANE3_IP4_UNUSED	0x3
+
+#endif /* _DT_BINDINGS_J7200_WIZ */

Should not the defines start with J7200_WIZ? SERDES0 seems like a too
generic prefix, at least to me.

Thanks, good point. I am not sure if WIZ should even be used.. It is
a TI internal prefix for various serdes solutions, but I agree that
SERDES0 is too generic a terminology. That said, we should cleanup
include/dt-bindings/mux/mux-j721e-wiz.h as well, prior to introducing
j7200 changes.

I'm planning to put all TI SERDES definitions in one header file "ti-serdes-mux.h"
and add SOC specific prefixes to the macros.

This will mean some churn in the existing DT files. (only 2 so far)

Are you guys OK if I do the change in one patch to avoid a broken build in between.
You guys can then decide whose tree it goes through.

The new SoC addition will be separate of course.

cheers,
-roger
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki