[PATCH 12/21] arm64: dts: qcom: msm8994: Remove qcom,msm-id and qcom-pmic-id properties
From: Konrad Dybcio <hidden>
Date: 2020-06-20 14:49:38
Also in:
linux-arm-msm, linux-clk, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
These should be set on a per-device basis, as they also include hardware revision bits that can vary between boards using the same SoC. Signed-off-by: Konrad Dybcio <redacted> --- arch/arm64/boot/dts/qcom/msm8994.dtsi | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index f363b678c3b3..b1a3f1732d84 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi@@ -8,10 +8,7 @@ / { model = "Qualcomm Technologies, Inc. MSM 8994"; compatible = "qcom,msm8994"; - // msm-id and pmic-id are required by bootloader for - // proper selection of dt blob - qcom,msm-id = <207 0x20000>; - qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; + interrupt-parent = <&intc>; #address-cells = <2>;
--
2.27.0