[PATCH 15/21] arm64: dts: qcom: msm8994: Add BLSP2 UART2 node
From: Konrad Dybcio <hidden>
Date: 2020-06-20 14:48:50
Also in:
linux-arm-msm, linux-clk, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Add a BLSP2 UART2 node to enable serial connection. Signed-off-by: Konrad Dybcio <redacted> --- arch/arm64/boot/dts/qcom/msm8994.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index df35c975c94c..20e859eb1318 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi@@ -243,6 +243,15 @@ blsp1_uart2: serial@f991e000 { <&gcc GCC_BLSP1_AHB_CLK>; }; + blsp2_uart2: serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupt = <GIC_SPI 146 IRQ_TYPE_EDGE_FALLING>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + }; + spmi_bus: qcom,spmi@fc4c0000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xfc4cf000 0x1000>,
--
2.27.0