Thread (26 messages) 26 messages, 4 authors, 2020-06-10

Re: [PATCH 00/10] spi: Adding support for Microchip Sparx5 SoC

From: Serge Semin <hidden>
Date: 2020-06-02 23:44:40
Also in: linux-arm-kernel, linux-spi, lkml

On Tue, Jun 02, 2020 at 10:18:28AM +0200, Lars Povlsen wrote:
Serge Semin writes:
quoted
Hello Lars,

On Wed, May 13, 2020 at 04:00:21PM +0200, Lars Povlsen wrote:
quoted
This is an add-on series to the main SoC Sparx5 series
(Message-ID: [ref]).

The series add support for Sparx5 on top of the existing
ocelot/jaguar2 spi driver.

It spins off the existing support for the MSCC platforms into a
separate driver, as adding new platforms from the MSCC/Microchip
product lines will further complicate (clutter) the original driver.

New YAML dt-bindings are provided for the resulting driver.

It is expected that the DT patches are to be taken directly by the arm-soc
maintainers.
Regarding our cooperation. It can be implemented as follows. Since your patchset
is less cumbersome than mine and is more ready to be integrated into the generic DW
APB SSI code, it would be better to first make it through Mark', Andy' and my reviews
to be further merged into the kernel version of the driver. After that I'll have
my code altered so it could be applied on top of your patches. When everything
is done we'll have a more comprehensive DW APB SSI driver with poll-based
PIO operations support, new features like rx-delay, etc.
Hi Serge!

I think I would be able to work on the SPI patches this week. Should I
base it on the current spi-next or 5.7? Then address the comments and
send out a new revision?
Finally I've done a part of review. It must be enough for v2. As Mark said the
new version is supposed to be based on the spi-next, since that branch's got
all recent DW APB SSI patches applied.

-Sergey
Thanks for reaching out.

---Lars
quoted
Thank you one more time for the series you've shared with us. Let's see what can
be done to improve it...

-Sergey
quoted
Lars Povlsen (10):
  spi: dw: Add support for polled operation via no IRQ specified in DT
  spi: dw: Add support for RX sample delay register
  spi: dw: Add support for client driver memory operations
  dt-bindings: spi: Add bindings for spi-dw-mchp
  spi: spi-dw-mmio: Spin off MSCC platforms into spi-dw-mchp
  dt-bindings: spi: spi-dw-mchp: Add Sparx5 support
  spi: spi-dw-mchp: Add Sparx5 support
  arm64: dts: sparx5: Add SPI controller
  arm64: dts: sparx5: Add spi-nor support
  arm64: dts: sparx5: Add spi-nand devices

 .../bindings/spi/mscc,ocelot-spi.yaml         |  89 ++++
 .../bindings/spi/snps,dw-apb-ssi.txt          |   7 +-
 MAINTAINERS                                   |   2 +
 arch/arm64/boot/dts/microchip/sparx5.dtsi     |  37 ++
 .../boot/dts/microchip/sparx5_pcb125.dts      |  16 +
 .../boot/dts/microchip/sparx5_pcb134.dts      |  22 +
 .../dts/microchip/sparx5_pcb134_board.dtsi    |   9 +
 .../boot/dts/microchip/sparx5_pcb135.dts      |  23 +
 .../dts/microchip/sparx5_pcb135_board.dtsi    |   9 +
 arch/mips/configs/generic/board-ocelot.config |   2 +-
 drivers/spi/Kconfig                           |   7 +
 drivers/spi/Makefile                          |   1 +
 drivers/spi/spi-dw-mchp.c                     | 399 ++++++++++++++++++
 drivers/spi/spi-dw-mmio.c                     |  93 ----
 drivers/spi/spi-dw.c                          |  31 +-
 drivers/spi/spi-dw.h                          |   4 +
 16 files changed, 644 insertions(+), 107 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/spi/mscc,ocelot-spi.yaml
 create mode 100644 drivers/spi/spi-dw-mchp.c

--
2.26.2

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Lars Povlsen,
Microchip
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help