Re: [PATCH 1/2] arm64: dts: Add a device tree for the Librem5 phone

On 14.05.20 17:57, Martin Kepplinger wrote:

From: "Angus Ainslie (Purism)" <redacted>

Add a devicetree description for the Librem 5 phone. The early batches
that have been sold are supported as well as the mass-produced device
available later this year, see https://puri.sm/products/librem-5/

This boots to a working console with working WWAN modem, wifi usdhc,
IMU sensor device, proximity sensor, haptic motor, gpio keys, GNSS and LEDs.

Signed-off-by: Martin Kepplinger <redacted>
Signed-off-by: Angus Ainslie (Purism) <redacted>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
 arch/arm64/boot/dts/freescale/Makefile        |    1 +
 .../boot/dts/freescale/imx8mq-librem5.dts     | 1174 +++++++++++++++++
 2 files changed, 1175 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5.dts

hi,

I highly appreciate it in case you can take time to review. It's not the
smallest board, but this "base" support isn't huge either. For
devicetree people this is certainly easy to read and I'll be happy for
any opinions, objections or Acks you might have.

thanks,

                               martin