Re: [PATCH v2 06/10] ARM: dts: r8a7742: Initial SoC device tree
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2020-05-04 10:28:54
Also in:
dmaengine, linux-gpio, linux-mmc, linux-renesas-soc, linux-serial, lkml
Hi Prabhakar, On Sun, May 3, 2020 at 11:47 PM Lad Prabhakar [off-list ref] wrote:
The initial R8A7742 SoC device tree including CPU[0-8], PMU, PFC, CPG, RST, SYSC, ICRAM[0-2], SCIFA2, MMC1, DMAC[0-1], GIC, PRR, timer and the required clock descriptions. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <redacted>
quoted hunk ↗ jump to hunk
--- /dev/null +++ b/arch/arm/boot/dts/r8a7742.dtsi
+ icram2: sram@e6300000 {
+ compatible = "mmio-sram";
+ reg = <0 0xe6300000 0 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xe6300000 0x40000>;
+ };
+
+ scifa2: serial@e6c60000 {
+ compatible = "renesas,scifa-r8a7742",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c60000 0 0x40>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 202>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
+ status = "disabled";
+ };
+
+ mmcif1: mmc@ee220000 {
+ compatible = "renesas,mmcif-r8a7742",
+ "renesas,sh-mmcif";
+ reg = <0 0xee220000 0 0x80>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 305>;
+ dmas = <&dmac0 0xe1>, <&dmac0 0xe2>,
+ <&dmac1 0xe1>, <&dmac1 0xe2>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 305>;
+ reg-io-width = <4>;
+ status = "disabled";
+ max-frequency = <97500000>;
+ };
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a7742",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,dmac-r8a7742",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
To preserve sort order, the DMAC nodes should be moved up.
No need to resend, will fix up while applying.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v5.8.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds