Re: [PATCH v2 08/10] arm64: dts: renesas: salvator: add a connection from adv748x codec (HDMI input) to the R-Car SoC
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: 2020-03-23 00:12:05
Also in:
linux-media, linux-renesas-soc, lkml
Hi Alex Thank you for your pa
As all known variants of the Salvator board have the HDMI decoder chip (the ADV7482) connected to the SSI4 on R-Car SoC, the ADV7482 endpoint and the connection definitions are placed in the common board file. For the same reason, the CLK_C clock line and I2C configuration (similar to the ak4613, on the same interface) are added into the common file. Signed-off-by: Alexander Riesen <redacted> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
(snip)
quoted hunk ↗ jump to hunk
@@ -758,8 +769,19 @@ &rcar_sound { <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&cs2000>, - <&audio_clk_c>, + <&adv7482_hdmi_in>, <&cpg CPG_CORE CPG_AUDIO_CLK_I>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i";
I think you don't need to overwrite clock-names here in this case ? Thank you for your help !! Best regards --- Kuninori Morimoto