[PATCH v2 2/3] can: m_can: m_can_platform: Add support for enabling transceiver
From: Faiz Abbas <hidden>
Date: 2020-02-17 14:27:31
Also in:
linux-arm-kernel, linux-can, lkml, netdev
Subsystem:
can network drivers, mcan device driver, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Markus Schneider-Pargmann, Linus Torvalds
CAN transceivers on some boards have a standby line which can be toggled to enable/disable the transceiver. Model this as an optional fixed xceiver regulator. Signed-off-by: Faiz Abbas <redacted> Acked-by: Sriram Dash <redacted> --- drivers/net/can/m_can/m_can_platform.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
index 38ea5e600fb8..719468fab507 100644
--- a/drivers/net/can/m_can/m_can_platform.c
+++ b/drivers/net/can/m_can/m_can_platform.c@@ -6,6 +6,7 @@ // Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/ #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include "m_can.h"
@@ -57,6 +58,7 @@ static int m_can_plat_probe(struct platform_device *pdev) { struct m_can_classdev *mcan_class; struct m_can_plat_priv *priv; + struct regulator *reg_xceiver; struct resource *res; void __iomem *addr; void __iomem *mram_addr;
@@ -111,6 +113,10 @@ static int m_can_plat_probe(struct platform_device *pdev) m_can_init_ram(mcan_class); + reg_xceiver = devm_regulator_get_optional(&pdev->dev, "xceiver"); + if (PTR_ERR(reg_xceiver) == -EPROBE_DEFER) + return -EPROBE_DEFER; + ret = m_can_class_register(mcan_class); failed_ret:
--
2.19.2