Thread (35 messages) 35 messages, 3 authors, 2019-08-27

Re: [PATCH 10/14] serial: tegra: add support to use 8 bytes trigger

From: Jon Hunter <jonathanh@nvidia.com>
Date: 2019-08-19 20:29:23
Also in: linux-serial, linux-tegra, lkml

On 12/08/2019 12:28, Krishna Yarlagadda wrote:
quoted hunk ↗ jump to hunk
From: Shardar Shariff Md <redacted>

Add support to use 8 bytes trigger for Tegra186 SOC.

Signed-off-by: Shardar Shariff Md <redacted>
Signed-off-by: Krishna Yarlagadda <redacted>
---
 drivers/tty/serial/serial-tegra.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 329923c..03d1d20 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -88,6 +88,7 @@ struct tegra_uart_chip_data {
 	bool	support_clk_src_div;
 	bool	fifo_mode_enable_status;
 	int	uart_max_port;
+	int	dma_burst_bytes;
I assume that this is a maximum, so why not say max_dma_burst_bytes?
quoted hunk ↗ jump to hunk
 };
 
 struct tegra_uart_port {
@@ -933,7 +934,12 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	 * programmed in the DMA registers.
 	 */
 	tup->fcr_shadow = UART_FCR_ENABLE_FIFO;
-	tup->fcr_shadow |= UART_FCR_R_TRIG_01;
+
+	if (tup->cdata->dma_burst_bytes == 8)
+		tup->fcr_shadow |= UART_FCR_R_TRIG_10;
+	else
+		tup->fcr_shadow |= UART_FCR_R_TRIG_01;
+
 	tup->fcr_shadow |= TEGRA_UART_TX_TRIG_16B;
 	tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
 
@@ -1046,7 +1052,7 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
 		}
 		dma_sconfig.src_addr = tup->uport.mapbase;
 		dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
-		dma_sconfig.src_maxburst = 4;
+		dma_sconfig.src_maxburst = tup->cdata->dma_burst_bytes;
 		tup->rx_dma_chan = dma_chan;
 		tup->rx_dma_buf_virt = dma_buf;
 		tup->rx_dma_buf_phys = dma_phys;
@@ -1325,6 +1331,7 @@ static struct tegra_uart_chip_data tegra20_uart_chip_data = {
 	.support_clk_src_div		= false,
 	.fifo_mode_enable_status	= false,
 	.uart_max_port			= 5,
+	.dma_burst_bytes		= 4,
Isn't it simpler to store the TRIG value here?

Jon

-- 
nvpublic
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help