Re: [PATCH V5 13/18] soc/tegra: pmc: Add pmc wake support for tegra210
From: Dmitry Osipenko <digetx@gmail.com>
Date: 2019-06-29 13:11:23
Also in:
linux-clk, linux-gpio, linux-tegra, lkml
28.06.2019 5:12, Sowjanya Komatineni пишет:
quoted hunk ↗ jump to hunk
This patch implements PMC wakeup sequence for Tegra210 and defines common used RTC alarm wake event. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> --- drivers/soc/tegra/pmc.c | 111 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 111 insertions(+)diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index 91c84d0e66ae..194100d77243 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c@@ -57,6 +57,12 @@ #define PMC_CNTRL_SYSCLK_OE BIT(11) /* system clock enable */ #define PMC_CNTRL_SYSCLK_POLARITY BIT(10) /* sys clk polarity */ #define PMC_CNTRL_MAIN_RST BIT(4) +#define PMC_CNTRL_LATCH_WAKEUPS BIT(5) + +#define PMC_WAKE_MASK 0x0c +#define PMC_WAKE_LEVEL 0x10 +#define PMC_WAKE_STATUS 0x14 +#define PMC_SW_WAKE_STATUS 0x18 #define DPD_SAMPLE 0x020 #define DPD_SAMPLE_ENABLE BIT(0)@@ -87,6 +93,11 @@ #define PMC_SCRATCH41 0x140 +#define PMC_WAKE2_MASK 0x160 +#define PMC_WAKE2_LEVEL 0x164 +#define PMC_WAKE2_STATUS 0x168 +#define PMC_SW_WAKE2_STATUS 0x16c + #define PMC_SENSOR_CTRL 0x1b0 #define PMC_SENSOR_CTRL_SCRATCH_WRITE BIT(2) #define PMC_SENSOR_CTRL_ENABLE_RST BIT(1)@@ -1922,6 +1933,55 @@ static const struct irq_domain_ops tegra_pmc_irq_domain_ops = { .alloc = tegra_pmc_irq_alloc, }; +static int tegra210_pmc_irq_set_wake(struct irq_data *data, unsigned int on) +{ + struct tegra_pmc *pmc = irq_data_get_irq_chip_data(data); + unsigned int offset, bit; + u32 value; + + if (data->hwirq == ULONG_MAX) + return 0; + + offset = data->hwirq / 32; + bit = data->hwirq % 32; + + /* + * latch wakeups to SW_WAKE_STATUS register to capture events + * that would not make it into wakeup event register during LP0 exit. + */
Minor nit: start multi-line comments with a capital letter.