Re: [PATCH v3 10/12] hikey960: Support usb functionality of Hikey960
From: Chen Yu <chenyu56@huawei.com>
Date: 2019-03-04 02:35:29
Also in:
linux-usb, lkml
Hi Andy, On 2019/3/3 0:01, Andy Shevchenko wrote:
On Sat, Mar 2, 2019 at 11:05 AM Yu Chen [off-list ref] wrote:quoted
This driver handles usb hub power on and typeC port event of HiKey960 board: 1)DP&DM switching between usb hub and typeC port base on typeC port state 2)Control power of usb hub on Hikey960 3)Control vbus of typeC portquoted
+config HISI_HIKEY_USB + tristate "USB functionality of HiSilicon Hikey Platform" + depends on OF && GPIOLIB + help + If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.quoted
+#include <linux/of.h>It's hard to see why this have depends on OF followed by above header inclusion.
This driver depends on devicetree, so I add "depends on OF". But is seems that "#include <linux/of.h>" can be removed after "of_" API have been removed. Thanks for your reminder!
quoted
+ hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus", + GPIOD_OUT_LOW);quoted
+ if (!hisi_hikey_usb->typec_vbus) + return -ENOENT;Hmm... Is it possible to get NULL pointer from gpiod_get() at all?quoted
+ if (!hisi_hikey_usb->otg_switch) + return -ENOENT;Ditto.
I check the comments of devm_gpio_get API, it will not return NULL pointer. But is it more safe to keep the NULL checking? What is your advice?
quoted
+ /* hub-vdd33-en is optional */ + hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en", + GPIOD_OUT_HIGH);devm_gpio_get_optional() if it's indeed optional.
OK.Thanks!
quoted
+ hisi_hikey_usb->role_sw = usb_role_switch_get(dev); + if (!hisi_hikey_usb->role_sw) + return -EPROBE_DEFER;quoted
+ else if (IS_ERR(hisi_hikey_usb->role_sw))Redundant 'else'
OK.
quoted
+ return PTR_ERR(hisi_hikey_usb->role_sw);quoted
+static const struct of_device_id id_table_hisi_hikey_usb[] = { + {.compatible = "hisilicon,gpio_hubv1"}, + {.compatible = "hisilicon,hikey960_usb"}, + {} +};MODULE_DEVICE_TABLE()?
OK. Thanks Yu Chen